• This is a fully automatic water distillation equipment has been designed for better and accurate control of the distillation unit and can be used in research laboratories, hospitals etc.

• It has been incorporated with advanced microprocessor based electronic circuitry.

• The alpha numeric LCD which has been used shows all messages that correspond to the running of the machine.

• Also there is alarm system which beeps as and when user attention is required. The distillation has following features:

• Replaceable silica sheathed (Quartz) heater: The horizontal quartz jacket is fitted with removable silica heater and screw threaded connectors for ease of cleaning when scaling is formed.

• Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.

• Boiler is provided with a Replaceable Side over Flow for easy draining and cleaning of boiling chamber, which also reduces the chances of breakage.

• The front cover is easily removable making the access to the glass parts very easy.

• Electrical Power: 220/240 V, 50/60Hz, Single Phase Supply. 

• Gate Valve: Conserves cooling water wastage in case of power failure.

• Flow Switch: Additional in-built safety feature for the equipment unit shut off in case of cooling water failure.

• Temperature switch: The boiler is equipped with a safety temperature switch which shuts off the unit if water level in the boiler falls below the heater, thus saving the glass parts from any damages.

• Reservoir Level Sensor: This helps in automatic working of the water distillation equipment. Depending on the water level in the reservoir it will automatically switch On/Off the equipment, thus saving energy. (Reservoir can also be provided with a storage capacity of 5 ltr, 10 ltr & 20 ltr made of Borosilicate Glass or polypropylene at an extra cost)