Dimensions: W75 x D75 x H115 cm
Net Weight: 800 grams
Main Material: Netting | Nylon
Mesh Size: 150 x 150 | 160 um aperture
Of the same dimensions as the 2400F insect tent, instead of using 96 x 26 mesh Polyester, this 2400F is sewn using fine 150 x 150 mesh Nylon to effectively keep aphids, thrips, and parasitic wasps from escaping or entering the tent.
The 2400F insect tent is constructed so that support poles are outside the enclosure. There are no places for insects to hide inside 2400F.
Insect Rearing Tent 2400F
- Can be used to house a potted plant
- Broader base and dome shaped structure make it convenient for insects to hold on to the plant surfaces for maximum times
- Can be used to study ETL levels in a controlled environment by releasing known number of insects into the cage
- Conveniently allow to record the observations without accessing the interiors through clear front pannel
- Easy to move around and to carry
- Can be convieniently placed on table top
- Any other purpose as scientist imagine for tent suitability
Contents in the package:
Cage | short-poles or fiberglass rods | long-poles or fiberglass rods | two-way connectors | three-way connectors
1. Use one way connector to connect two short fiberglass rods
2. Thread one assembly from step 1 into each of the four sleeves, either on the sides or on the base of the tent depending on the size of the rearing tent ordered
3. Use three way connectors to connect the remaining fiberglass rods
4. Fasten the X formed poles on top of the cage with the ribbons provided to finish the rearing tent set up
Caution: Never ever try to forcefully dismantle the rearing tent when the fiberglass rods are locked to the connectors. Try to find loose ends somewhere else where you can easily pull the fixed fiberglass rod from the connector. Once you dismantle the cage one side, it is easy to loosen the tightly fixed fiberglass rods by slightly rotating clock or anti-clockwise.